Seamless Contraction-Control Framework for Unplanned Grid-Connected/Stand-Alone Transitions of Grid-Forming Inverters

arXiv:2606.09042v1 Announce Type: new Abstract: Unplanned grid-connected (GC)/stand-alone (SA) transitions commonly occur in AC microgrids during protection trips, manual breaker operation, or low-bandwidth supervisory communication. Under such unplanned transitions, a grid-forming inverter must support the local-load voltage in stand-alone operation and regulate the desired power/current injection in grid-connected operation. Existing P--Q droop-based seamless-transfer methods often rely on planned transition commands, supervisory islanding detection, or pre-synchronization interval, which may prevent timely voltage/current support during unplanned bidirectional transitions. To address this problem, this paper proposes a seamless contraction-control (SCC) framework for target dynamics. Using the SCC, contraction-based grid-connected current-control and stand-alone voltage-control laws are proposed. With the new control laws, the inverter achieves transient stability and converges to the target trajectory with a prescribed convergence rate. Furthermore, a breaker-status observer is proposed to infer the grid-connected/stand-alone mode from voltage measurements on both sides of the breaker, eliminating the need for a dedicated pre-synchronization interval or supervisory islanding detection process and enabling timely voltage/current support during unplanned transitions. Experimental results validate that the proposed method achieves stand-alone voltage support, stable grid-connected current injection under symmetrical/unsymmetrical grid-voltage sag and phase-jump disturbances, and unplanned bidirectional transitions.