GPIO
No mentions found
This entity hasn't been tracked yet, or Iris is still building its knowledge base.
Related Articles from SNS
ESP32 Bit Pirate, a Hardware Hacking Tool with WebCLI That Speaks Every Protocol
ESP32 Bit Pirate is an open-source firmware that turns your device into a multi-protocol hacker's tool, inspired by the legendary Bus Pirate. It supports sniffing, sending, scripting, and interacting with various digital protocols (I2C, UART, 1-Wire, SPI, etc.) via a serial terminal or web-based CLI.
Porting the ThinkPad X61 to Coreboot
Porting the ThinkPad x61 to coreboot Table of Contents An introduction to my IBM/Lenovo ThinkPad addiction Over 10 years ago I got my first ThinkPad x60. I got interested in free software by reading the about GNU page in the GNU Emacs editor. Free software back then and certainly now is quite usable, typically without much closed-source software.
ESP32-S31
Comprehensive Connectivity ESP32-S31 integrates both wireless and wired connectivity for versatile networking. It supports 2.4 GHz Wi-Fi 6 (802.11ax) for enhanced transmission efficiency and reduced power consumption, making it ideal for battery-powered and always-connected devices. IEEE 802.15.4 enables Thread and Zigbee protocols, and Bluetooth® 5.4 (LE) supports LE Audio for high-quality, low-power audio streaming, Direction Finding, and Bluetooth Mesh 1.1 for scalable many-to-many device...
Flipper Zero Zig Template
A modern, production-ready template for developing Flipper Zero applications using the Zig programming language. This project provides a streamlined build system that integrates Zig with the Flipper Zero SDK, enabling developers to write type-safe, memory-safe applications for the Flipper Zero platform. This template bridges Zig's powerful build system and language features with the Flipper Zero firmware development kit.
A Matter Wi-Fi Light Bulb in Rust on the Raspberry Pi Pico 2 W
This repository contains examples for the Raspberry Pi Pico 2 (RP2350) board, written in Rust using the Embassy async framework. cargo generate --git https://github.com/ImplFerris/pico2-template.git --name rust-rpico2-embassy-examples Board: Raspberry Pi Pico 2 - MCU: RP2350 (Dual-core Arm Cortex-M33 and RISC-V cores) - On-board peripherals: - LED on GPIO25 - I2C pins: - I2C0 SDA: GPIO4 - I2C0 SCL: GPIO5 - I2C1 SDA: GPIO2 - I2C1 SCL: GPIO3 - UART pins: - UART0 TX: GPIO0, UART0 RX: GPIO1 -...
Flipper One wants to be the Linux multi-tool in your pocket
Flipper Devices has unveiled the Flipper One, an ARM-based Linux computer designed as a versatile multi-tool, featuring extensive connectivity like HDMI and Gigabit Ethernet. Unlike the Flipper Zero, the One is a full Linux computer with 8GB of RAM and 64GB of storage, priced around $350 for the base model. The company aims for full mainline Linux kernel support to ensure broad compatibility and flexibility for users.
Brume is a 24-voice multi-timbral desktop synth for the CM5
FM Six operators across twelve algorithm topologies, per-op ratio and level, global feedback, a per-voice FM-index envelope, and a voice-tail state-variable filter with its own envelope — DX-style FM with subtractive shaping on the way out. A desktop multi-timbral music machine with four synthesis engines, a 10″ touch surface, and one cable to your DAW. Brume runs four synthesis engines with a shared voice tail (state-variable filter, amp envelope, modulation router), so patches stay...
I tested every IP KVM in my Homelab
I tested every IP KVM in my Homelab Since the PiKVM came out in 2017, there's been an explosion of IP KVMs. I've tested almost every one. But what are they good for?