Science
A homodyne detection scheme for all-optical photon-photon scattering experiments using 2D detectors
Key Points
arXiv:2606.07460v1 Announce Type: cross Abstract: Low signal-to-noise ratios are a common problem in experiments attempting to measure photon-photon scattering. In the optical regime, where petawatt lasers with femtosecond pulse durations are used, the large beam sizes cause the major contribution of the background to be spread over up to 100 ps in arrival time, whereas the signal is confined to the femtosecond scale. We present a balanced homodyne measurement scheme, which exploits this...
arXiv:2606.07460v1 Announce Type: cross
Abstract: Low signal-to-noise ratios are a common problem in experiments attempting to measure photon-photon scattering. In the optical regime, where petawatt lasers with femtosecond pulse durations are used, the large beam sizes cause the major contribution of the background to be spread over up to 100 ps in arrival time, whereas the signal is confined to the femtosecond scale. We present a balanced homodyne measurement scheme, which exploits this property to suppress the background. By interfering the signal with a short reference pulse, the measurement becomes effectively gated to the pulse duration and is therefore only sensitive to the co-timed part of the light, reducing the effective background by 3-4 orders of magnitude. Additionally, increasing the reference pulse energy increases the amplitude of the measured quantity without changing the intrinsic signal-to-noise ratio. Using this property, other external noise sources can be made negligible by boosting the measured quantity above the noise floor. Using two-dimensional detectors further enhances the scheme by improving sensitivity and enabling self-referenced single-pulse measurements. In addition, an evaluation procedure based on maximum-likelihood estimation is presented and demonstrated. The robustness and performance of this scheme are demonstrated on simulated data, where a more than 100-fold reduction of measurement time compared to conventional photon-counting methods under realistic conditions is found.