Home › Environment › AI and experiments reveal impurities hindering waste...
Environment

AI and experiments reveal impurities hindering waste plastic pyrolysis oil recycling

AI and experiments reveal impurities hindering waste plastic pyrolysis oil recycling
Key Points

AI and experiments reveal impurities hindering waste plastic pyrolysis oil recycling Sadie Harley Scientific Editor Robert Egan Senior Editor A Korean research team has identified how impurities interfere with the use of waste plastic pyrolysis oil as a petrochemical feedstock through catalytic experiments and artificial intelligence (AI)-based computational chemistry. The findings, published in the journal ACS Catalysis, provide a scientific basis for predicting potential declines in...

AI and experiments reveal impurities hindering waste plastic pyrolysis oil recycling Sadie Harley Scientific Editor Robert Egan Senior Editor A Korean research team has identified how impurities interfere with the use of waste plastic pyrolysis oil as a petrochemical feedstock through catalytic experiments and artificial intelligence (AI)-based computational chemistry. The findings, published in the journal ACS Catalysis, provide a scientific basis for predicting potential declines in catalytic performance according to the types and concentrations of impurities present. A research team led by Dr. Do Kyoung Kim at the Korea Research Institute of Chemical Technology (KRICT), in collaboration with a team led by Professor Tae Yong Kim at Korea University of Technology and Education (KOREATECH), has elucidated the effects of nitrogen-, sulfur-, chlorine-, and oxygen-containing impurities in waste plastic pyrolysis oil on catalytic performance and the underlying mechanisms. Variable impurities complicate feedstock use Waste plastic pyrolysis oil is obtained by thermally decomposing discarded plastics at high temperatures. It can serve as an alternative to petroleum or naphtha feedstocks. Catalytic cracking of the hydrocarbons contained in pyrolysis oil produces light olefins, which are basic feedstocks for plastics and chemical products. However, pyrolysis oil contains various impurities originating from different plastics and additives. Because the types and concentrations of these impurities vary depending on the feedstock, understanding their effects on catalytic performance is essential for stable production. In 2024, the research team reported a circulating fluidized-bed catalytic cracking technology capable of converting waste plastic pyrolysis oil into light olefins without additional hydroprocessing. However, that study was conducted using only one type of pyrolysis oil, limiting its ability to assess catalytic performance for feedstocks with different impurity compositions. As a follow-up, the present study focused on how variations in impurity types and concentrations affect light-olefin production. Nitrogen compounds show sharply different effects The researchers individually added 13 nitrogen-, sulfur-, chlorine-, and oxygen-containing impurities to actual waste plastic pyrolysis oil and compared changes in light-olefin yields and product distributions using the zeolite catalyst developed in 2024. The results showed that sulfur-, chlorine-, and oxygen-containing compounds had relatively minor effects, whereas certain nitrogen-containing compounds significantly reduced catalytic performance. In particular, 2-methylpyridine had a pronounced effect, while benzonitrile had a relatively small effect. This demonstrated that not only the total nitrogen content but also the specific chemical forms of nitrogen-containing compounds are important. Competition for catalytic sites To investigate the underlying mechanisms, the researchers employed an AI-based computational chemistry technique known as a machine-learning potential (MLP). Using this approach, they compared how strongly nitrogen-containing compounds and the hydrocarbons constituting pyrolysis oil adsorb onto active sites within the catalyst. Zeolite catalysts contain active sites where hydrocarbons undergo cracking reactions. When certain nitrogen-containing impurities occupy these sites first, fewer sites remain available for hydrocarbon reactions, resulting in reduced production yields. The researchers also confirmed that molecular size and the spatial environment inside the catalyst influence the decline in catalytic performance. The study further showed that higher concentrations of nitrogen-containing impurities led to greater performance degradation, while increasing the reaction temperature mitigated their effects. Catalysts that had lost activity after repeated use also recovered their initial performance following regeneration to remove coke deposits. These findings support the feasibility of circulating fluidized-bed processes in which catalysts are continuously regenerated. Tailoring operations to feedstock composition The significance of this study lies in establishing a basis for evaluating the suitability of waste plastic pyrolysis oil as a feedstock by considering not only the total impurity content but also the types of impurities present. The findings are expected to support feedstock-specific impurity management, optimization of pretreatment processes and operating conditions, and the industrial application of waste plastic recycling technologies. Publication details Xuan Tin Tran et al., Impact of Nitrogen and Other Heteroatoms on Catalytic Cracking of Crude Waste Plastic Pyrolysis Oil for Light-Olefin Production, ACS Catalysis (2026). DOI: 10.1021/acscatal.5c08941 Journal information: ACS Catalysis
AI (ORG) Sadie Harley Scientific (ORG) Robert Egan (PERSON) Korean (ORG) ACS Catalysis (ORG) Kyoung Kim (PERSON) the Korea Research Institute of Chemical Technology (ORG) KRICT (ORG) Tae Yong Kim (PERSON) Korea University of Technology and Education (KOREATECH (ORG)
Originally published by Phys.org Read original →